Description / Features

Chill-Shields are 360^o thermal hanger shields designed to meet a broad range of pipe support applications on low temperature lines. They provide a continuous section of insulation and vapor barrier, and are designed for pipe systems operating between -250^o F. and +225^o F. The insulation and vapor barrier extend beyond the galvanized steel shield for a neat, vapor-tight joint with the adjoining insulation. Chill-Shields are suitable for use in any type of clamp as well as in band-type hangers. High-compressive strength polyurethane inserts and extra long, heavy gauge steel shields ensure proper pipe support. These cost effective designs meet the requirements of either pipe or tube systems.

Applications

• For indoor use on clamping support systems, clevis or other band-type hangers.
• Chilled piping to domestic hot water.
• Hanger spans per MSS SP-69 Table 5 (not suitable for extended hanger spans).
• Available for pipe 1/2 inch through 24 inches.
• Insulation thickness 1/2 inch through 4 inches.

Materials / Construction

• 360^o Polyurethane
  80 PSI - Flame Spread -15-, Smoke Developed -360-, Thermal Conductivity ('k') .19 @ 75 F. mean.
  140 PSI - Flame Spread -15-, Smoke Developed -550-, Thermal Conductivity ('k') .20 @ 75 F. mean.
• Meeting ASTM D-1621, D-1622, D-1623, C-203, C-518, E-96 and E-84.
• 360^o Non-reactive vapor barrier jacket meeting ASTM D-774, D-828 and E-84.
• Adhesive complying with NFPA 90-A and ASTM E-84, Flame Spread -10-, Smoke Developed -0-.
• 360^o G-90 Galvanized steel shield, small check per ASTM A-527.
• All units are asbestos free and 100% made and assembled in the U.S.A.

www.valueng.com/catalog/

© Value Engineered Products, Inc., All Rights Reserved