Chill-Shield E.R.

chill-shielder

Description/Features

    The Chill-Shield E.R. thermal hanger shield is similar to the Chill-Shield. Both are 360 degree units designed for low temperature systems. The Chill-Shield E.R. incorporates an elastomeric vapor barrier jacket and matches lines insulated with elastomeric rubber ('Armaflex') or polyethylene-type insulation materials. Both the Chill-Shield and Chill-Shield E.R. use high density/high compressive strength polyurethane inserts and have an exterior jacket designed to match the adjoining insulation. The Chill-Shield E.R. units are suitable for use in any type of clamp as well as in all band-type hangers.

Applications

  • For indoor use on clamping support systems, clevis or band-type hangers.
  • Low temperature tubing systems to minus 250° F.
  • Hanger spans per MSS SP-69 Table 5.
  • Available for pipe sizes 1/2 inch through 24 inches.
  • Insulation thickness 3/4, 1, 1-1/2 and 2 inch.

Materials/Construction

  • 360° Polyurethane foam:
    80 PSI - Flame Spread -15-, Smoke Developed -360-, Thermal Conductivity ('k') .19 @ 75 F mean.
    140 PSI - Flame Spread -15-, Smoke Developed -550-, Thermal Conductivity ('k') .20 @ 75 F. mean.
  • Meets ASTM D-1621, D-1622, D-1623, C-203, C-518, E-96 and E-84.
  • 360° Elastomeric jacket meeting ASTM D-1056, C-534 and E-84, Flame Spread -25-, Smoke Developed -50-.
  • Adhesive complying with NFPA 90-A & ASTM E-84, Flame Spread -10-, Smoke Developed -0-.
  • 360° G-90 Galvanized steel shield, small check per ASTM A-527.
  • All units are asbestos free and 100% made and assembled in the U.S.A.

dimensionsofchillshielder

www.valueng.com/catalog/

© Value Engineered Products, Inc., All Rights Reserved