PS Series Insulated Pipe Slides

pgseriesinsulatedpipeslides

Description / Features

    Value Engineered Products' line of insulated pipe slides provides a superior method of supporting pipes while allowing unrestricted axial and lateral pipe movement. Use of a 360° insulation insert of Xonotlite calcium silicate eliminates areas of heat loss or gain allowed by direct attachment systems. The rugged nature and high compressive strength of this insert material supports pipes to their maximum allowable spans, eliminating the need for intermediary supports. The 'PS Series' of insulated pipe slides incorporates a logical system of hardware design and when used in conjunction with the 'PG Series' of insulated pipe guides, the critical 'bottom of pipe (BOP) to 'top of steel' (TOS) dimension stays constant throughout the system. This practical design facilitates fast installation saving valuable field labor. The 'virgin' PTFE slide pad provides an extremely low coefficient of friction and is available in a variety of sizes which can allow up to seven inches of lateral travel.

    Specify PS-Plus Series pipe slides for systems requiring greater axial and/or lateral pipe movement.

Applications

  • All piping systems operating between +20° F. to +1700° F.
  • Pipe sizes 1/2" to 20", larger pipe sizes by design.
  • Hanger spans to MSS SP-69, Table 3 maximums.
  • Insulation thickness 1" to 4" (see application charts).
  • Total axial pipe travel of 4" (PS-Series), 9" travel for PS-Plus Series.
  • Up to 7" of total lateral travel (PS-Plus Series).
  • Base plates may be bolted or welded in place.

Material Construction

  • Powder coated finish meeting ASTM B-117, ASTM D-3359, and ASTM D-3363.
  • Heat bonded PTFE low friction slide pad.
  • 1700° F. Xonotlite insulation with compressive strengths of either 450 or 900 PSI meeting ASTM C-656 Type II, E-84, Flame Spread -0-, Smoke Developed -0-.
  • Vapor barrier jacket meeting ASTM D-774, D-828 and E-84, Flame Spread -5-, Smoke Developed -5-.
  • Insulation 'k'-Factor of .54 @ 200 degrees F.
  • 100% American-made materials and construction.

www.valueng.com/catalog/

© Value Engineered Products, Inc., All Rights Reserved