Quik-Shield

quik-shield

Description / Features

     Quik-Shields ™ are economically priced 180o thermal hanger shields providing a continuous section of insulation and vapor barrier through a variety of pipe hangers. The vapor barrier jacket extends beyond the galvanized steel shield and beyond the insulation insert for a neat, vapor-tight fit with both the adjoining and the field-applied top insulation. To assure proper support in all situations, high density 450 PSI structural inserts are installed on units for 10" pipe with 1" wall thickness and on all units for 12" pipe and larger.

Applications

  • For indoor use on flat surfaces, clevis or other band-type hangers.
  • Pipe sizes 16 inch and larger in clevis hangers only.
  • Chilled to steam piping and dual temperature lines.
  • Hanger spans per MSS SP-69 Table 5.
  • Available for pipe 1/2 inch through 30 inches.
  • Insulation thickness 1/2 inch through 4 inches.

Materials / Construction

  • 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Developed -0-, Thermal Conductivity ('k') .40 @ 75 F. mean.
  • Adhesive complying with NFPA 90-A, ASTM E-84, Flame Spread -10-, Smoke Developed -0-.
  • G-90 Galvanized steel shield, small check per ASTM A-527.
  • Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame Spread -5-, Smoke Developed -5-.
  • Structural insert (12" pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-795 and E-84, Flame Spread -0-, Smoke Developed -0-.
  • All units and components are asbestos free and 100% made and assembled in the U.S.A.

dimensionsofquikshield

www.valueng.com/catalog/

© Value Engineered Products, Inc., All Rights Reserved