[Description/Features] [Applications] [Materials/Construction] [Dimensions]

---

Description/Features
	Chill-Shields™ are 360° thermal hanger shields designed to meet a broad range of pipe support applications on low temperature lines. They provide a continuous section of insulation and vapor barrier through a wide variety of pipe hangers for pipe systems operating between -297°F and 225°F. The insulation and vapor barrier extend beyond the galvanized steel shield for a neat, vapor-tight joint with the adjoining insulation. Chill-Shields™ are suitable for use in any type of clamp as well as in band-type hangers. High-density Polyisocyanurate inserts ensure proper support. Cost effective designs meet the requirements of either pipe or tube systems.
Applications
	For indoor use on clamping support systems, clevis or other band-type hangers. Chilled piping to domestic hot water. Hanger spans per MSS SP-69 Table 5 (not suitable for extended hanger spans). Available for pipe from 1/2 inch through 12 inches. Insulation thickness from 1/2 inch through 4 inches.
		Back to Top
Materials/Construction
	360° Polyisocyanurate, either 80 PSI (Flame Spread -15-, Smoke Developed -360-, Thermal Conductivity ("k") .19 @ 75° F mean) or 140 PSI (Flame -15-, Smoke -550-, Thermal Conductivity ("k") .20 @ 75° F mean) meeting ASTM D-1621, D-1622, D-1623, C-203, C-518, E-96 and E-84. 360° Non-reactive vapor barrier jacket meeting ASTM D-774, D-828 and E-84, Flame -5-, Smoke-5-. Adhesive complying with NFPA 90-A and ASTM E-84, Flame -10-, Smoke -0-. 360° G-90 Galvanized steel shield, small check per ASTM A-527. All units are Asbestos-free and are 100% made and assembled in the U.S.A.

 Back to Top

[Home] [Pro-Shield] [Pro-Shield NT] [Quik-Shield] [Chill-Shield] [MaxSpan] [MaxSpan RH] [Submittal Sheets] [Project List] [Contact Us]

---

© Value Engineered Products, Inc. All Rights Reserved