[Suggested Specification Guidelines] [Pipe Dimensions, Weights, & MSS Recommended Spans] [Hanger Sizing Guide]

VEP Products meet or exceed MSS Standards!

Pipeshields for spans and styles referenced by Table 5 MSS SP-69:
Pro-Shield^TM
Pro-Shield NT^TM
Quik-Shield^TM
Chill-Shield

Pipeshields for spans and styles referenced by Table 3 MSS SP-69:
MaxSpan^TM
MaxSpan RH^TM

Submittal Sheets
- PDF Format -
Print and submit with your project

Project List

Contact Us:

Value Engineered Products, Inc.
1350 S. Cherokee St.
Denver CO 80223

(303) 715-9990
(800) 921-1177

Talk to us at: valueng@aol.com

Reference Guide for Matching Insulated Pipe Supports with Standard Hanger ID's

Minimum Hanger Inside Diameters (In Inches) Iron Pipe Size X 1/2 X 1 X 1-1/2 X 2 1/2 2.000 3.000 4.125 5.125 3/4 2.250 3.000 4.125 5.125 1 2.500 3.625 4.625 5.625 1-1/4 3.000 3.625 5.125 5.625 1-1/2 3.125 4.125 5.125 6.750 2 3.625 4.625 5.625 6.750 2-1/2 4.125 5.125 6.750 7.750 3 4.625 5.625 6.750 7.750 4 5.625 6.750 7.750 8.750 5 6.750 7.750 8.750 9.750 6 7.750 8.750 9.750 10.875 8 9.875 10.875 11.875 12.875 10 12.000 12.875 14.250 15.250 12 14.000 15.250 16.250 17.250 14 15.125 16.375 17.375 18.375 Copper Tube Size X 1/2 X 1 X 1-1/2 X 2 5/8 2.000 3.000 3.500 4.625 7/8 2.000 3.000 4.125 5.125 1-1/8 2.250 3.000 4.125 5.125 1-3/8 2.500 3.500 4.500 5.625 1-5/8 3.000 3.500 5.125 5.625 2-1/8 3.625 4.125 5.125 6.750 2-5/8 4.125 4.625 5.625 6.750 3-1/8 4.625 5.125 6.750 7.750 4-1/8 5.625 6.625 7.750 8.750 6-1/8 7.750 8.750 9.750 10.875 Hanger sizing for insulated lines must accommodate standard insulation sizes. Bold Type indicates sizes where standard insulation O.D.'s do not change as pipe size changes. Half inch wall O.D.'s vary by manufacturer and may be subject to change. OD's comply with ASTM C-585. Units are subject to normal manufacturing tolerances.