[Description/Features] [Applications] [Materials/Construction] [Dimensions]

pro shield nt by value engineered products inc

     
Description/Features  
  Pro-Shield N.T. units provide a continuous section of insulation and vapor barrier through a wide variety of pipe hangers for piping systems operating between 20° and 1200°F. Pro-Shield N.T. units are designed for use in band-type hangers and on flat surfaces. The insulation and vapor barrier extend beyond the galvanized steel shield for a neat, vapor-tight joint with the adjoining insulation. Pro-Shield N.T. meets the MSS standard for Type 40 Shields per MSS SP-58, Paragraph 9.2.2. To assure proper support, high density 450 PSI inserts are included on units for 10" pipe with 1" wall thickness and on all units for 12" pipe and larger.
     
Applications  
 
  • For indoor use on flat surfaces or clevis & other band-type hangers (see WeatherShield upgrade for outdoor use).
  • Pipe sizes 16 inch and larger in clevis hangers only.
  • Chilled to steam piping and dual temperature lines.
  • Hanger spans per MSS SP-69 Table 5.
  • Available for pipe from ½ inch through 30 inches.
  • Insulation thickness from ½ inch through 4 inches.
      Back to Top
Materials/Construction  
 
  • 135 PSI Calcium silicate meeting ASTM C-533, C-585, C-795, E-84, Flame Spread -0-, Smoke Developed -0-, Thermal Conductivity ("k") .40 @ 75° F mean.
  • Adhesive complying with NFPA 90-A, ASTM E-84, Flame -10-, Smoke -0-.
  • G-90 Galvanized steel shield, small check per ASTM A-527.
  • Vapor Barrier of all service jacket meeting ASTM D-774, D-828 and E-84, Flame -5-, Smoke -5-.
  • Structural insert (12" pipe and larger) minimum 450 PSI calcium silicate meeting ASTM C-533, C-795 and E-84, Flame -0-, Smoke -0-.
  • All units and components are asbestos free and are 100% made and assembled in the U.S.A.
     
 
DIMENSIONS
PIPE SIZE
½" to 1½"
2" to 5"
6" to 8"
10" & 12"
14" to 24"
INSULATION LENGTH
6"
150 mm
6"
150 mm
9"
230 mm
9"
230 mm
12"
300 mm
SHIELD LENGTH
4"
100 mm
4"
100 mm
6"
150 mm
6"
150 mm
10"
250 mm
SHIELD GAUGE
22 ga.
.9 mm
20 ga.
1 mm
16 ga.
1.6 mm
14 ga.
2 mm
12 ga.
2.75 mm

  Back to Top

[Home] [Pro-Shield] [Pro-Shield NT] [Quik-Shield] [Chill-Shield] [MaxSpan] [MaxSpan RH] [Submittal Sheets] [Project List] [Contact Us]

Value Engineered Products, Inc.
1350 S. Cherokee St.
Denver CO 80223

Toll Free: (800) 921-1177
Or: (303) 715-9990

© Value Engineered Products, Inc. All Rights Reserved